Wireless-N WiFi repeater is a networking device that expands the WiFi signals in every corner of your house. 300m WiFi repeater setup is simple and easy, but technical problems can occur sometimes, after the setup or during the setup. One of the errors is Wireless-N repeater not working. Don’t worry, down here we will help you to find out, what happened to your WiFi extender and how you can solve it. We will share troubleshooting tips to fix the issue. Let’s dive into a section, where you will see possible reasons why your networking device is not responding.
Reasons of ‘Repeater is Not Working’ Problem
There can be several reasons why your repeater is behaving like this. Let’s see the possible reasons behind this ‘range extender not responding’ issue.
1. Usage of Damaged cables like network cable and wall switch port can be a reason of the issue.
2. Weak link with the router and wrong connection between the modem to router also can cause this ‘repeater not working’ problem.
3. Other reasons like networking interruptions, too much connected devices and dust can interfere in your repeater working.
So, above are the reasons of the problem. Now, take a look how you can solve this issue by following simple troubleshooting tips.
Solutions of ‘WiFi Repeater Not Working’ Issue
Check Out Cable and Wall Socket
- You should check network cable that you are using to connect router to repeater.
- If you find any cut, then replace it with a new one quickly.
- Wireless-N repeater is a plug-in networking device, so make sure you are using a wall socket, which is in good condition.
- If you find it damaged, then call an electrician to fix the electric wall socket.
Ensure All WiFi Network Links
- Router to modem link help you to use the internet services and router to repeater link expands the WiFi signals.
- So, you have to be sure that all these networking devices are connected to each other correctly.
- Make sure the Ethernet cable is inserted into right ports of all the devices.
- In the router to modem link, the network cable must be connected to LAN port of the modem and WAN port of the router.
- And in the router to repeater connection, you should check the cable is inserted to LAN port of the router and WAN port of the repeater.
Shift Repeater to Optimal Spot
- You have to check that there are no electronic devices near to the WiFi repeater, because these devices can interrupt WiFi signals.
- So, if you find any electronic devices nearby, then shift your router to any other optimal location.
Reboot WiFi Device
- If you apply all the above-written tips and can’t solve the problem, then reboot your repeater.
- Just find the power button on the repeater, and press it two times. The first time press will turn off the device.
- The second press will complete the reboot process.
Reset Range Extender
If no troubleshooting tips work, then just reset the networking device. You can perform reset process by long pressing the reset button back on the extender. After the reset, you have to log in to the interface of the extender via myrepeater.net and manage setting again.
End Lines
In this full-of-information article, you have learned why your Wireless-N repeater is not working. Up there, we have shared some troubleshooting tips that help you to fix the ‘extender not working’ issue. We are hoping that you have found out the reason of the issue and solved it with the help of this informative article.
